Networking – Page 2

Multichannel/Microwave Multipoint Distribution Service Architecture

MMDS Architecture: – MMDS is also a distribution system which stands for Multichannel/Microwave Multipoint Distribution Service. It is used for small business and home offices. It is not used for large customer requirements such as central offices. It is used

Share with Friends :

Configuration of Various routing protocols with Cisco Router

Routing Protocols Routing is the act of moving information across an inter-network from a source to a destination. Along the way, at least one intermediate node typically is encountered. Routing is often contrasted with bridging, which might seem to accomplish

Share with Friends :

Convergence in EIGRP

Convergence in EIGRP Convergence in an EIGRP network can be quite complicated. Part of this complexity is due to Cisco’s standard of supporting up to six parallel routes to all destinations. Although this standard has helped make Cisco the market

Share with Friends :

Enhanced Interior Gateway Routing Protocol

Enhanced Interior Gateway Routing Protocols Enhanced Interior Gateway Routing Protocol, also known as either EIGRP or Enhanced IGRP, is a relatively new innovation from Cisco that is based on IGRP. EIGRP shares its predecessor’s distance-vector technology, but differs greatly in

Share with Friends :

Distance Vector Routing Protocols

Distance Vector Routing Protocols The name distance vector is derived from the fact that routes are advertised as vectors of (distance, direction), where distance is defined in terms of a metric and direction is defined in terms of the next-hop

Share with Friends :

Routing and Its Types

Routing Routing is the act of moving information across an inter-network from a source to a destination. Along the way, at least one intermediate node typically is encountered. Routing is often contrasted with bridging, which might seem to accomplish precisely

Share with Friends :

Access Router using console & Modes of Routers

ACCESS Router Using Console. Step 1 Click the Start button on the Windows Taskbar, and select Programs > Accessories > Communications > HyperTerminal. HyperTerminal launches and displays the Connection Description dialog box.Type any name Step 2 Select com port Step 3 On the

Share with Friends :

Valid IP Addressing vs Invalid IP Addressing

IP Addressing: – IP addressing in network area we consider as a unique string of numbers separated by full stops that identifies each computer using the Internet Protocol to communicate over a network. It is very useful in internet, when

Share with Friends :

Types of Ethernet Cabling

Ethernet Cabling is used to hardware Components With Rj45 Jack.These cable are shielded and unshielded which is Connected with Server,Router,Switch,Hub,Repeater,Computer,Laptop,Modem. Three Types of Ethernet Cabling Straight-Through Cable Crossover Cable Rollover Cable Straight-Through Cable Router,Switch,Hub To PC Router To SWITCH Crossover

Share with Friends :

Making of Sub-Nets of the Networks

SUB-NETTING: – Subnetting is a process of dividing these large complex IP addresses into the different IP ranges. This technique is used within the network so that the wastage of IP addresses could be controlled. Major Advantage of the Sub-Netting

Share with Friends :